V3 offers 16 creative voice effects plus compression, reverb, delay and enhance

Add up to two voices to create 3-part harmonies across a full octave

Independent compression, reverb and delay controls

Built-in Enhancer for increased sound clarity

48V phantom power for condenser microphones

USB 2.0 audio interface capable of recording up to 16/24/32-bit, 44.1 kHz

Line outputs for connecting to PA systems or mixing consoles

Headphone output with dedicated volume control

Auxiliary input

Operates for 3.5 hours on 4 AA batteries or with Zoom AD-16 AC adapter

EFFECTS: 16 types

CONCURRENT EFFECTS: 5

SAMPLING FREQUENCY: 44.1 kHz

A/D CONVERSION: 24-bit 128× oversampling

D/A CONVERSION: 24-bit 128× oversampling

SIGNAL PROCESSING: 32-bit

FREQUENCY RESPONSE: 20 Hz–20 kHz (+1 dB/−3 dB) (10 kΩ load)

INPUTS

MIC IN: XLR jack

INPUT GAIN: +3 – +40 dB

MAXIMUM INPUT LEVEL: +4 dBu

INPUT IMPEDANCE: 3 kΩ or higher (1 kHz)

PHANTOM POWER: +48 V

AUX IN: Stereo mini jack

RATED INPUT LEVEL: −10 dBu

INPUT IMPEDANCE (LINE): 22 kΩ

OUTPUTS

L/R OUT: Unbalanced TS jacks

MAXIMUM OUTPUT LEVEL: +6 dBu

OUTPUT IMPEDANCE: 100 Ω

PHONES: Stereo mini jack

MAXIMUM OUTPUT LEVEL: 20 mW + 20 mW (into 32 Ω load)

EQUIVALENT INPUT NOISE (WHEN PHANTOM POWER OFF): –125 dBu or less (A-weighted, 150 Ω input, +40 dB input gain)

NOISE FLOOR (RESIDUAL NOISE): –75 dBu

CONTROL INPUT: FS01/FP02M input

POWER

POWER: AC adapter (9 V DC 500 mA, center negative) (ZOOM AD-16) 4 AA batteries (about 3.5 hours continuous operation time when using alkaline batteries)

USB: CONNECTOR: Micro USB

AUDIO INTERFACE OPERATION: 2-in/2-out USB2.0 Full Speed, 44.1 kHz, 16/24/32-bit

Power can also be supplied through the USB port.

When using a cable designed only for power, other USB functions cannot be used.

WEIGHTS AND DIMENSIONS

EXTERNAL DIMENSIONS: 150 mm (D) × 190 mm (W) × 50 mm (H)

WEIGHT: 0.59 kg (excluding batteries)