Cod: 9551309570004
Available only online for shipping or collection within 24/72 hours of ordering
The product is available in our remote warehouses but not physically in-store. Upon order, it will be processed within approximately 24 hours, with an estimated delivery time of 3 to 5 working days.
Ask an expert
We are musicians and at your service, contact us!
info@yourmusiconline.it
Zoom P4next - Registratore/Interfaccia audio portatile per podcast
P4next is the next generation of the PodTrak P4, a mobile microSD recorder and 12×2 USB audio interface with 24-bit 48 kHz recording capabilities. There are four XLR preamp inputs and four independent headphone outputs, which is the perfect number of inputs to meet the needs of most podcasts.
The PodTrak P4next features 4 XLR inputs and next-gen features like AI noise reduction, tone shaping, and voice compression- making broadcast-quality podcasting easier than ever.
Don’t let hums, buzzes, and street noise ruin your conversation. Let AI noise reduction learn and remove unwanted noise, keeping your voice clear, natural, and detailed.
The tone feature instantly adds polish to your voice with EQ and de-essing, reducing harshness and adding warmth for a clear, professional podcast sound.
The built-in compressor keeps your podcast sounding crisp and balanced, smoothing out sudden shouts, laughter, and whispers.
Some microphones need more power. The P4next’s four XLR inputs provide up to +70dB of gain, allowing you to use even the most demanding podcast mics.
Some microphones need more power. The P4next’s four XLR inputs provide up to +70dB of gain, allowing you to use even the most demanding podcast mics.
The P4next’s compact design and versatile power options give you more than portability - it gives you the freedom to record your podcast anywhere. Run it on two AA batteries or via USB from a mobile battery, bus power, or AC adapter
Inputs INPUT (mono/stereo) 4
Outputs PHONES (stereo) 4
Inputs
INPUT Connectors XLR jacks × 4 (XLR: 2 HOT)
Input gain −∞ – +70 dB
Input impedance 3 kΩ or more
Maximum input level 0 dBu
Phantom power +48 V
Smartphone connection jack Connector TRRS mini jack (4 contacts, TIP: L, RING: R, RING: GND, SLEEVE: MIC)
Input impedance 2.7 kΩ or more
Maximum input level +3 dBu
Output impedance 100 Ω or less
Maximum output level −24 dBu
Outputs
PHONES Connectors Stereo mini jack × 4
Maximum output level 6 mW + 6 mW (per output into 32Ω load)
Headphone volume knob shared by both outputs
Output impedance 10 Ω or less
Effects
TONE
COMP
AI NOISE REDUCTION
Recorder
Maximum simultaneous recording tracks 11
Maximum simultaneous playback tracks 2
Recording formats 48kHz/24-bit WAV Stereo/mono
Recording media microSDHC memory cards
microSDXC memory cards
CLICK HERE for information about microSD cards that have been confirmed to work with this unit.
USB (for data)
Connector USB Type-C
• Use a USB cable that supports data transfer.
Audio interface USB 2.0 High Speed
Input and output channels 12 in, 2 out
Sampling frequency 48 kHz
Bit depth 24-bit
File transfer USB 2.0 High Speed
Equivalent input noise
EIN –125 dBu or less (IHF-A) at +70dB/150Ω input
Display
128×64 OLED
Power
Batteries 2 AA batteries
Alkaline, Lithium, or Rechargeable NiMH
USB (DC5V) power port / USB (for data) port Commercially-available USB AC adapter
12W or higher USB AC adapter (5V, 2.4A or higher)
• USB bus power is supported.
Estimated continuous recording time using batteries (when using 4 dynamic microphones)
Alkaline batteries About 3.5 hours
NiMH batteries (1900 mAh) About 4 hours
Lithium batteries About 8.5 hours
Dynamic mics connected to INPUT 1–4 jacks, Multi Track mode, USB audio interface not used, 48V (phantom power) OFF, headphones connected to PHONES 1–4 jacks (32Ω loads), Power Saving set to 1 min, INPUT SELECT switch set to XLR, BTA-2 not used
These values are approximate.
Continuous battery operation times were determined using in-house testing methods.
They will vary greatly according to use conditions.
Estimated continuous recording time using batteries (when using 4 condenser microphones)
Alkaline batteries About 20 minutes
NiMH batteries (1900 mAh) About 1.5 hours
Lithium batteries About 2.5 hours
Condenser mics connected to INPUT 1–4 jacks, Multi Track mode, USB audio interface not used, 48V (phantom power) ON, headphones connected to PHONES 1–4 jacks (32Ω loads), Power Saving set to 1 min, INPUT SELECT switch set to XLR, BTA-2 not used
These values are approximate.
Continuous battery operation times were determined using in-house testing methods.
They will vary greatly according to use conditions.
When using condenser mics, we recommend using nickel-metal hydride rechargeable batteries or lithium batteries.
Power consumption 5 W maximum
Dimensions 125.9 mm (W) × 120 mm (D) × 40 mm (H)
Weight (including batteries) 300 g
No downloadable documents available. For more information, contact us at info@yourmusiconline.it
Sound Cards
Not available
Free shipping
Altre Schede Audio
Not available
Free shipping
Altre Schede Audio
Not available
Free shipping
