Available only online and shipped within 24/72h
The product is available in our remote warehouses but not physically in-store. Upon order, it will be processed within approximately 24 hours, with an estimated delivery time of 3 to 5 working days.
Ask an expert
We are musicians and at your service, contact us!
info@yourmusiconline.it
RME PRO LINE DPS-2
The new DPS-2 is an exceptional linear power supply that boasts not only impressive technical data but also a wide range of unique and highly useful features. For instance, the compact device features two differently filtered outputs. The housing and front panel of the DPS-2 are based on the ADI-2 series, accommodating RME's innovative circuitry design on only half rack width.
The output Linear is a traditional DC output but is equipped with multi-stage passive and active filtering including a 30,000 μF capacitor bank, a ferrite choke as well as an active output filter with a hybrid voltage regulator.
The second output is based on RME's proprietary μFilter technology. Here the signal from the pre-filtered Linear output is also processed by highly efficient active filters to achieve an exceptionally clean DC output with just a few µV (micro-volts) noise. In addition the output has sensor technology, which measures and adapts the output voltage directly at the DC connector of the supplied DC cable. Two DC Sensor connection cable with lockable & non-lockable DC plug 2.1 x 5.5 mm, (1 m) are included.
As a result the output impedance and load regulation are extremely low, thus ensuring a clean output voltage of +12.0 V at 2.5 A load, completely avoiding any load-dependent voltage drops. Please note: only one output is usable at a time.
AC Mains (Primary)
Standard input voltage: 115 V or 230 V, set by internal connector
Input voltage range: 95 V – 130 V or 200 V – 260 V
Power consumption idle: 1 watt
Power consumption typical, 2 A load on Linear: 38.5 watts
Power consumption typical, 2 A load on μFilter: 39.8 watts
Fuses for 230 V: 2 x 250 V / 0.63 A slow blow, size: 5x20 mm
Fuses for 115 V: 2 x 250 V / 1.2 A slow blow, size: 5x20 mm
DC Linear – Secondary
Maximum output voltage: 12.2 V @ 0 A
Minimum output voltage: 11.5 V @ 3 A
Continuous output current: 2.5 A
Continuous output power: 30 watts
Maximum output current: 4 A
Short circuit current: <0.1 A
Noise @ 1 A, AES17: 30 μV, 3 μV A-weighted
Noise @ 1 A, 100 kHz bandwidth: 30 μV, 4 μV A-weighted
Noise @ 2 A, AES17: 111 μV, 14 μV A-weighted
Noise @ 2 A, 100 kHz bandwidth: 111 μV, 14 μV A-weighted
Output impedance including cable: 0.22 Ohm
Load Regulation (0/1/2 A): 3.63 %
Overload protection: > 3.2 A
Overheating protection: > 80 °C (176 °F)
Undervoltage detection: < 9.5 V
DC μFilter - Secondary
Output voltage: 12.0 V
Continuous output current: 2.5 A
Continuous output power: 30 watts
Maximum output current: 3.5 A
Short circuit current: <0.1 A
Noise @ 0 - 3 A, AES17: < 2 μV, < 1 μV A-weighted
Noise @ 0 - 3 A, 100 kHz bandwidth: <3 μV, < 2 μV A-weighted
Output impedance including cable: 0.012 ohm
Load Regulation (0/1/2 A): 0.20 %
Overload protection: > 3.2 A
Overheating protection: > 80 °C (176 °F)
Undervoltage detection: < 9.5 V
General
Dimensions (WxHxD): 130 x 44 x 205 mm, 5.1“ x 1.7“ x 8.1“
Weight: 1.89 kg (4.17 lbs)
Temperature range: +5 °C up to +40°Celsius (41 °F up to 112 °F)
Relative humidity: < 75%, not condensing
Package Contents
DPS-2
DC Sensor connection cable with lockable DC plug 2.1x5.5 mm, 1 m (3.3 ft)
DC Sensor connection cable with DC plug 2.1x5.5 mm, 1 m (3.3 ft)
Manual
IEC Power cable, 1.5 m (4.9 ft)
No downloadable documents available. For more information, contact us at info@yourmusiconline.it
Pro Audio Accessories
Available only online and shipped within 24/72h
Free shipping
Pro Audio Accessories
Available only online and shipped within 24/72h
Free shipping
Pro Audio Accessories
Not available
Headphones, Earphones and In Ear Systems
Not available
There are no reviews yet. Register and leave yours!
