Markbass Little Mark IV Ninja

Description

Markbass Little Mark IV Ninja

The updated 4-band EQ section features very effective controls that allow you to easily find the sound you want, boosting or cutting up to 16dB for each of the 4 bands to cover all the tonal nuances needed in any musical genre. In addition, the Old School filter cuts the

high frequencies and provides a round, smooth tone. The 3-way rotary switch allows you to choose between a super-balanced flat tone, a

scooped preset that lowers the mids while boosting the lows and highs, offering a superb slap sound, or finally the "FSW" option to control both mute and scooped EQ on demand by connecting an optional dual footswitch.

> High power 1000W/ultimate dynamics

This high-power head is amplified by a powerful 1000W MPT power amplifier. The Little Mark IV Ninja boasts ample power reserve and considerable

headroom with exceptionally clear sound and outstanding dynamics at any playing volume!

> BI-BAND LIMITER

Our new bi-band limiter responds faster and more dynamically to your playing than traditional limiters and lets your highs "breathe" for a more natural sound. This makes our heads the best choice for anyone who loves a quick, punchy attack at high volumes.

> MUTE SWITCH / LINE OUT LEVEL CONTROL / PRE-POST EQ

On the front panel of the Little Mark IV series amplifiers there is a convenient mute switch, along with the Line Out level control knob that

allows precise control of the signal sent to the mixer/PA. On the rear panel there is a Pre-Post EQ switch that allows you to set the routing of the XLR output before or after equalization as required.

> MPT - MARK'S PROPRIETARY TECHNOLOGY

Many other bass amplifiers on the market use power amplifiers that are not specifically designed for bass. At Markbass, Marco De Virgiliis has invested heavily in research and development to internally develop proprietary power amplifier technology. Our MPT power amplifier has been built from scratch to respect and elevate the intrinsic tone of your instrument.

The minimum ohm load for all Markbass heads is 4 ohms.

Markbass amplifiers/combos are manufactured to be sold and used in the country of purchase and are factory preset for that country's voltage. Due to homologation issues, the voltage cannot be changed.

Specifications

INPUTS INPUT

impedance: 1 Mohm, max. voltage: 9 Vpp RETURN impedance: 22 Kohm, max. voltage: 10 Vpp

CONTROLS

GAIN –46 dB to +23 dB range

LINE OUT level control on front panel

PRE/POST EQ (for line out) switch on rear panel

GROUND LIFT switch on rear panel

MUTE SWITCH

MASTER VOLUME

EQUALIZATION

LOW: center frequency 68 Hz; level: ±16 dB

MID LOW: center frequency 360 Hz; level: ±16 dB

MID HIGH: center frequency 800 Hz; level: ±16 dB

HIGH: center frequency 10 kHz; level: ±16 dB

OLD SCHOOL: max cut range: 250 Hz – 20 kHz

3 WAY ROTARY SWITCH: flat/scooped-mid/FSW

OUTPUTS

SEND EFFECTS: unbalanced, max. voltage 20 Vpp

TUNER OUT: unbalanced, max. voltage 2 Vpp

LINE OUT balanced XLR, max. voltage 20 Vpp

SPEAKER OUT: speakon

DIMENSIONS AND WEIGHT

HEIGHT: 2 rack units (3.27 in. / 83 mm)

WIDTH: 10.87 in. / 27.6 cm (19 in. / 48.3 cm with optional rack ears)

DEPTH: 9.84 in. / 25 cm

WEIGHT: 6.17 lbs / 2.8 kg

OTHERS

BI-BAND LIMITER

FOOTSWITCH (OPTIONAL): FLAT/SCOOPED-MID

OUTPUT POWER: 1000W RMS @ 4 ohm, 600W RMS @ 8 ohm

POWER REQUIREMENT:

100V; 120V; 230V; 240V 50/60Hz (Voltage is factory preset according to region of sale)