Kma Logan Overdrive Effect Pedal

Description

KMA LOGAN OVERDRIVE EFFECT PEDAL

- Logan is an overdrive from KMA Audio Machines available in Rome at Your Music. Another Overdrive, you ask? The answer is YES :D and not only because deep down we are serial overdrive accumulators, but also and above all because Logan is a standalone product thanks to some small features that make it unique.

- It has 25db of headroom, treble and bass controls with a 15db cut & boost, and most importantly, a parametric mids control from 100hz to 2.4 khz with a boost or cut up to 12db and a toggle switch that allows the mid control to be placed before or after the gain, thus allowing for additional saturation and further tonal possibilities.

- The Mids circuit is selectable via the footswitch, allowing it to be used as an additional boost for the amp. A pedal to try at an incredible price in Rome at Your Music.

Discover KMA products

Specifications

-In-Depth Controls:

- Potentiometer:

- Level: Sets the overall output level. It has plenty on tap to push your amp hard even on low drive settings.

- Drive: Sets the amount of overdrive.

- M-C/B (Cut/Boost): Cut (ccw) or boost (cw) your mids about +/-12db.

- M-Freq: Defines the center frequency of your mids between 100Hz fully left to 2.4kHz fully right.

- Lows: Active bass control to boost or cut your low end (+/-15dB).

- Highs: Active treble control to boost or cut your high end (+/-15dB).

- Switches: Post <-> Pre Switch

- This lets you decide where to place the parametric Mid-EQ in the circuit. PRE-lets you crunch your mids even more for a more saturated tone, while POST will give you a level boost and make your selected mid frequency more present.

- Mids-Footswitch

Activates/Deactivates the mid EQ section. Perfect for a solo-boost, more pronounced rhythm tone or to change between scooped and flat mids etc..

- Engage (Main Bypass): that's the main bypass switch to activate or deactive Logan.

- Jacks: In- Input jack (top-right); Out - Output jack (top-left)

- Exp (right-sided): Plug in your TRS expression pedal here to sweep through the Mid-EQ frequencies, like when using a Wah-Wah pedal. We recommend the MOOG-EP3 or any other expression pedal with the same TRS-combination.

- DO NOT PLUG IN A CV - cause it doesn't work.