Audio Technica Atm350Gl Condenser Microphone With Guitar Clamp

Description

AUDIO TECHNICA ATM350GL CONDENSER MICROPHONE WITH GUITAR MOUNT

Cardioid Condenser Instrument Microphone w/ Guitar Mounting System (Long)

Sturdy adjustable clamp screw attaches to guitars

Adjustable length between 90 mm and 135 mm

Built to handle extremely powerful, dynamic sound sources

Large selection of other mount options available separately

Packaged with AT8490L Long Gooseneck

Specifications

Element Fixed-charge back plate, permanently polarized condenser

Polar Pattern Cardioid

Frequency Response 40 – 20,000 Hz

Open Circuit Sensitivity –49 dB (3.5 mV) re 1V at 1 Pa

Impedance 200 ohms

Maximum Input Sound Level 159 dB SPL, 1 kHz at 1% T.H.D.

Low Frequency Roll Off 80 Hz, 12 dB/octave

Switches Flat, roll-off

Dynamic Range 130 dB, 1 kHz at Max SPL

Signal-to-Noise Ratio 65 dB, 1 kHz at 1 Pa

Phantom Power Requirements 11– 52V DC, 3.5 mA typical

Weight Microphone: 14.5 g

Power Module: 90 g

Dimensions Microphone: 37.8 mm long, 12.2 mm maximum body diameter

Power Module: 92 mm long, 18.9 mm diameter

Output Connector Power Module: Integral 3-pin XLRM-type

Cable 4.0 m long (permanently attached to microphone), 3.2 mm diameter, 2-conductor shielded cable with HIROSE HR10-type connector

Accessories Included ATM350a cardioid condenser microphone; AT8543 power module; AT8491G UniMount® guitar mount; AT8490L UniMount® 9" gooseneck; AT8468 violin mount (hook-and-loop fastener); protective carrying case