Art Splitcompro Microphone Splitter Combiner

Description

Art Splitcompro Microphone Splitter Combiner

The ARTcessories SPLITComPro is an ideal audio utility for applications where it is necessary to split a low-impedance microphone signal to feed two separate mixers, or conversely, to combine balanced low-impedance microphone signals from two microphones into a single channel input.

As a Splitter, the SPLITComPro provides one direct-coupled output and one isolated output from a single microphone input.

Typical applications include sending the direct output to the FoH or main mixer, and sending the second isolated output to a monitor or recording mixer.

The main Mic output passes phantom power from the main mixer to the main Mic input, for use with condenser microphones.

Phantom power is blocked and cannot pass to the isolated Mic output. As a Combiner, the SPLITComPro provides a single output from two microphone inputs. The phase switch can be used to invert the relative phase of the isolated Mic input.

Typical applications include dual-miking percussion instruments, choirs, and instrument amplifiers.

Phantom power passes through each output to its respective input (main to main, isolated to isolated), but cannot pass from one signal path to the other: only audio passes between the main and isolated signal paths and is present on all inputs and outputs.

Specifications

Low distortion with wide frequency response

2 Functions in one device: combining and/or splitting

Phase switch for subtractive combinations

Galvanic isolation to prevent phantom power from passing between channels

Ground Lift to reduce noise from ground loops

Frequency Response: 20Hz-150kHz, ±0.2dB @ 0dBu

THD: <0.0007% 20Hz-20kHz @ 0dBu input

Phase Response: <10° @ 20Hz-150kHz (ref. 1kHz)

Typical Source Impedance: 150 Ohms

Typical Output Load Impedance: 1 kOhm

Dimensions: H47 x 117 x 89mm

Weight: 0.32kg