Delay Riverberi e Effetti d'Ambiente

Kma Audio Machines Cirrus Delay E Reverb Con Tap Tempo

Name: Kma Audio Machines Cirrus Delay E Reverb Con Tap Tempo
Brand: KMA Audio Machines
SKU: KMACIRRUS
Price: 199 EUR
Availability: OutOfStock

Cod: KMACIRRUS

€199.00

Oppure 3 rate con alma pay

Spedizione
gratuita

Aggiungi al carrello

Tuo anche a rate

Simula il finanziamento

Non disponibile

Chiedi ad un esperto

Siamo musicisti e siamo a vostra disposizione, contattaci!
info@yourmusiconline.it

KMA AUDIO MACHINES CIRRUS DELAY E REVERB CON TAP TEMPO

Il Kma Cirrus è un Riverbero e Delay con tap tempo incorporato disponibile nel nostro store a Roma. Un pedale decisamente completo che prevede l'utilizzo in simultanea dei due effetti con la scelta dell'ordine, delle suddivisioni del tap delay.

Una funzione veramente interessante è la funzione Sens che sta a gestire la sensitivity dell'inviluppo che può essere associato sia al riverbero che al delay. Altra funzione veramente interessante e indipendente per tipo di effetto è lo switch Mod a tre posizioni che indica che tipo di modulazione associare al delay e al riverbero. Completa il prodotto la predisposizione per il pedale d'espressione e un circuito send/return che permette l'utilizzo di effetti aggiuntivi in catena. Il Cirrus è un pedale che offre tantissime soluzioni sonore ad un prezzo tutto sommato sotto al media. Kma si conferma tra i marchi più in voga di questi anni

Scopri il catalogo prodotti KMA

In-Depth Controls:

Delay-Section:

Delay

Sets the mix of your dry and Delayed signal. From fully dry counter-clockwise to fully wet clockwise and a 50/50 ratio at 12 o'clock.

Time

Sets the Delay length. From a quick slap-back to long soaring echoes.

Repeats

Sets the number of repeats. From a single echo to endless faux loops.

Sens

Defines the sensitivity for the envelope features on each Mode.

S/H: Depth and Rate of the Sample/Hold Filter

MOD: Modulation depth

OCT: Fade-in time of the Octave

Mode-Switch (top left):

Choose between a Modulated Delay (MOD), Sample/Hold Filtered Delay (S/H) or a fade-in Octave Delay (OCT).

Tap-Division Switch

Choose between no division (1/1), a dotted eighth mode (1/8D) or a triplet mode (1/3).

Reverb-Section:

Reverb

Sets the mix of your dry and Reverb signal. From fully dry counter-clockwise to fully wet clockwise and a 50/50 ratio at 12 o'clock.

Decay

Sets the decay of the Reverb - from a small room to an infinite space.

Damp

Sets the high frequency response. Counter-clockwise for shiny bright reverberations or clockwise for dark and mysterious ambience.

Sens

Defines the sensitivity for the envelope features on each Mode.

HP: Sets the cut-off frequency of a closing High-Pass Filter.

MOD: Sets the modulation depth.

LP: Sets the cut-off frequency of an opening Low-Pass Filter.

Mode-Switch (top right)

Choose between a Modulated Reverb (MOD), an opening Low-Pass Filter (LP) or a closing High-Pass Filter (HP).

Global Controls:

Order-Switch

Select between two Delay and Reverb order Modes: RVB: Delay into Reverb DLY: Reverb into Delay

EXP-Mode Switch

Sets which parameter will be controlled via an Expression-Pedal (follow the sun rays) - choose between TIME, REPEATS, SENS (DLY), SENS (RVB), DAMP or DECAY.

Jacks

Input/Output

Upper right (triangle facing down) is your Input and upper left (triangle facing up) is your Output.

EXP

Plug in your Expression pedal here. We recommend a standard TRS connection. DO NOT use a CV source on this connection, otherwise you can cause irreparable damage to the internal DSP chip.

FX-Loop

Lets you insert any pedal before the Delay and Reverb and will also affect the dry signal. Use the Loop to create your own distinct Delay/Reverb sound by adding your favorite additional pedals upfront. You will need to obtain a separate Mono to TRS Stereo-Y- Splitter Cable - Ring for the output (send) and Tip for the input (return).

Footswitches

Engage

Press the switch normally to turn the pedal on and off. When pedal is off, press and hold to engage the pedal momentarily, for as long as you hold the switch down. Release the switch and the pedal will turn off again. Press and hold the switch down when the pedal is engaged to max out the Reverb decay.

Tap

Tap to set the Delay time. Press at least three times to set the time. Press and hold the switch to max out the Delay repeats.

Internal Controls

Internal spill/trails cut DIP-Switch

Switch 1 - selects whether your signal is sent/not sent to the Reverb/Delay in Bypass (useful for creative uses such as big ambient drone pads etc.).

Switch 2 - activates hard bypass (OFF) or activates the Reverb and Delay trails (ON).

Nessun documento scaricabile. Per maggiori informazioni contattaci a info@yourmusiconline.it