Preamp Booster e Equalizzatori

Orange Terror stamp

Name: Orange Terror stamp
Brand: ORANGE
SKU: 639415
Price: 190 EUR
Availability: InStock

Cod: 639415

€190.00

Spedizione gratuita

Disponibile solo online e spedito in 24/72h

Aggiungi al carrello

Oppure 3 rate con alma pay

Tuo anche a rate

Simula il finanziamento

Il prodotto è disponibile nei nostri magazzini remoti e non fisicamente in negozio. In caso di ordine il prodotto viene gestito e messi in partenza in 24 ore circa con arrivo a domicilio stimato tra i 3 e i 5 giorni lavorativi.

Chiedi ad un esperto

Siamo musicisti e siamo a vostra disposizione, contattaci!
info@yourmusiconline.it

Terror Stamp è un suono spaventoso sulla punta dei tuoi piedi! Preamplificatore valvolare, speaker output 8/16 Ohm, FX Loop buffered e uscita cuffie con emulatore di cabinet. Si integra senza problemi con altri pedali, su un palco live, nelle registrazioni in studio o nella pratica quotidiana. Il design ibrido Valvolare/Solid State del Terror Stamp ti dà il meglio di entrambi i mondi. Dal chiaro cristallino al poderoso high-gain, il preamp basato sulle ECC83 dona tutti gli armonici, le dinamiche e il feeling, mentre l’amplificatore 20W Classe AB Solid State mantiene il controllo dei suoni rendendoli ottimali in ogni situazione di volume. Master Volume Footswitchabile. Pieno range di suono su due differenti volumi. Manopole di forma esclusiva. FX Loop a bassa impedenza buffered. Circuito analogico CabSim per un accesso istantaneo ad una emulazione Orange 4x12 completa. Dimensioni: 6.1cm x 13.4cm x 9.9cm. Peso: 0.38Kg.

SAFETY

IMPORTANT SAFETY INFORMATION

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarised or grounding-type plug. A polarised plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated ‘dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

Terminals labelled as “Speaker Outputs” must be connected to a speaker cabinet of the designated load rating using an un-shielded two conductor cable for speaker use at all times during operation.

The exclamation point within an equilateral triangle and "WARNING" are intended to alert the user to the presence of important operating instructions. Failure to heed the instructions will result in severe injury or death.

NEVER PLACE OBJECTS CONTAINING LIQUIDS ON OR NEAR THE PRODUCT. IF LIQUID FALLS INTO THE PRODUCT, DISCONNECT THE DEVICE FROM THE MAINS OUTLET AND REFER THE PRODUCT TO AN AUTHORISED TECHNICIAN.

NO USER SERVICEABLE PARTS INSIDE. DO NOT ATTEMPT TO GAIN ACCESS TO THE INTERIOR OF THE PRODUCT.

This product complies with the WEEE Directive (2002/96/EC) marking requirement. This affixed product label indicates that you must not discard this electrical/electronic product in domestic household waste. Please contact your local authority for details of your nearest approved recycling facility.

POWERING YOUR TERROR STAMP

15V DC / 2A Switching Power Adapter

Only use the included power adapter with the Terror Stamp

Before use, ensure the supplied IEC cord plug is the correct plug fitting for your region. If unsure, contact your Dealer.

Ensure the IEC cord fits tightly in the adapter before connecting the IEC cord to your AC mains supply.

If the adapter or IEC cord becomes damaged, disconnect the power adapter from the mains/wall outlet and contact your Orange Dealer.

FRONT PANEL

Volume 1

Adjusts the overall output volume. Experiment with the Gain control to achieve the desired balance.

Set to the minimum position before switching the unit ON. The LED will illuminate when the channel is engaged.

When using the Phones output, keep the Volume control low to avoid overloading headphones or the input of your mixer/recording console.

Volume 2

Adjusts the overall output volume. Experiment with the Gain control to achieve the desired balance.

Set to the minimum position before switching the unit ON. The LED will illuminate when the channel is engaged.

When using the Phones output, keep the Volume control low to avoid overloading headphones or the input of your mixer/recording console.

Shape

Adjusts the tonal response.

Turning clockwise reduces mids and produces brighter tones. Turning fully clockwise ‘scoops’ the mids entirely.

Turning anticlockwise increases the mids and smooths the treble.

Gain

Adjusts the gain level. A variety of tones can be achieved, from clean (low setting) to heavy distortion (higher settings) and everywhere in between.

Note: With the Gain set to minimum, no sound will be heard.

Volume Toggle Switch

The Terror StAmp has two master volume channels. Engage this switch to toggle between the volume setting on each channel

REAR PANEL

123456

1. INPUT CONNECT YOUR INSTRUMENT USING A QUALITY SHIELDED INSTRUMENT CABLE ONLY.

2. FX LOOP SEND / LINE OUT CONNECT THE EFFECTS SEND TO THE INPUT OF THE EFFECTS PEDAL OR CONNECT THE UNIT DIRECTLY TO A MIXING DESK OR OTHER SIMILAR DEVICE.

3. FX LOOP RETURN CONNECT THE OUTPUT OF YOUR EFFECTS CHAIN TO THE RETURN JACK.

NOTE. OVERDRIVE, BOOST AND FILTER EFFECTS (WAH ETC) ARE USUALLY BEST PLACED BETWEEN THE GUITAR AND THE AMP INPUT, RATHER THAN IN THE FX LOOP.

4. CABSIM OUTPUT THE CABSIM HEADPHONE OUT FAITHFULLY EMULATES THE SOUND OF A MIC’D 4×12 CABINET. USE HEADPHONES FOR SILENT PRACTICE OR CONNECT TO A MIXER/RECORDING CONSOLE.

5. SPEAKER OUTPUT ENSURE YOU ONLY CONNECT CABS WITH THE CORRECT IMPEDANCE.

1 X 16 OHM

2 X 16 OHM

1 X 8 OHM

DC INPUT 15V DC / 2A CONNECT THE INCLUDED SWITCHING POWER ADAPTOR TO THIS SOCKET. ONLY USE THE POWER ADAPTOR SUPPLIED WITH THE PRODUCT. IF THE ADAPTOR OR IEC CORD BECOMES DAMAGED, DISCONTINUE USE IMMEDIATELY AND CONTACT YOUR ORANGE DEALER.

Nessun documento scaricabile. Per maggiori informazioni contattaci a info@yourmusiconline.it