{"title":"RME","description":"","products":[{"product_id":"rme-premium-line-digiface-dante-rmedida","title":"RME PREMIUM LINE Digiface Dante","description":"\u003ch2\u003eDescription\u003c\/h2\u003eThe new portable audio interface allows 64 Dante and 64 MADI channels to be transmitted via a single USB 3.0 connection. The Dante Audio Over IP protocol was developed by the Australian company Audinate and allows the transmission of uncompressed audio signals with low latency over long distances. For greater flexibility and to support the growing popularity of solutions based on this protocol in the pro-audio industry, the Digiface Dante USB 3.0 offers a new mobile solution compared to previous internal Dante PCI cards. Power is provided both via an external PSU and via the USB bus.With the integration of the MADIface series MADI drivers, the Digiface Dante also allows the user to transfer up to 64 MADI channels via USB 3.0. For this reason, the BNC inputs for word clock can be switched to MADI I\/O. A total of 128 channels can be controlled via DANTE software and Total Mix FX with its routing and monitoring options. In this way, TotalMix FX allows users to create independent sub-mixes depending on the number of available outputs.The Digiface Dante features two banks of redundant network ports that can be used as both Input and Output, as well as a switch and for redundant operations with primary and secondary networks in case of increased security requirements. In addition, the interface can also be used as a 64-channel Dante\/MADI converter if the computer's USB connection is not in use. The Digiface Dante also has a high-quality headphone monitoring output that can be used as a line output for transmitting analog stereo signals.","brand":"RME","offers":[{"title":"Default Title","offer_id":58001927930201,"sku":"RMEDIDA","price":1286.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"rme-premium-line-madiface-usb","title":"RME PREMIUM LINE MADIFace USB","description":"\u003ch2\u003eDescription\u003c\/h2\u003eMADI USB Card, 64 I\/O Channels","brand":"RME","offers":[{"title":"Default Title","offer_id":58001928388953,"sku":"RMEMAU","price":769.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1036\/3633\/6985\/files\/Rm_madifaceusb.jpg?v=1778101370"},{"product_id":"rme-pro-line-breakout-analogico-bilanciato-bo9632-xlrmkh","title":"RME PRO LINE Balanced Analog Breakout (BO9632-XLRMKH)","description":"\u003ch2\u003eDescription\u003c\/h2\u003eD SUB 15-pin 4 balanced analog outputs, 2xMIDI, 1x headphone for HDSP9632-Babyface","brand":"RME","offers":[{"title":"Default Title","offer_id":58001928552793,"sku":"BRCANB","price":103.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1036\/3633\/6985\/files\/breakout-analogico-bilanciato-bo9632-xlrmkh.jpg?v=1778101375"},{"product_id":"rme-pro-line-modulo-madi-sfp-mm","title":"RME PRO LINE MADI-SFP-MM Module","description":"\u003ch2\u003eDescription\u003c\/h2\u003eSFP accessory module for 12Mic, AVB Tool and M-1616 Pro - Multi Mode","brand":"RME","offers":[{"title":"Default Title","offer_id":58001928978777,"sku":"MADISFPMM","price":92.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1036\/3633\/6985\/files\/modulo-madi-sfp-mm.jpg?v=1778101390"},{"product_id":"adi-2-dac","title":"Rme Adi-2 Dac Fs","description":"\u003ch2\u003eDescription\u003c\/h2\u003e2-channel 24-bit 768 kHz A\/D converter with ADAT, SPDIF input and Analog output","brand":"RME","offers":[{"title":"Default Title","offer_id":58001929077081,"sku":"RMEADID","price":1129.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1036\/3633\/6985\/files\/rmeadid-images-photo-imported.png?v=1781167483"},{"product_id":"rme-pro-line-adi-2-fs","title":"RME PRO LINE ADI-2 FS","description":"\u003ch2\u003eDescription\u003c\/h2\u003e2-channel 24Bit 768 kHz AD\/DA converter with ADAT, SPDIF and AES - half rack unit","brand":"RME","offers":[{"title":"Default Title","offer_id":58001929175385,"sku":"RMEADI2FS","price":748.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1036\/3633\/6985\/files\/adi-2-fs.png?v=1778101395"},{"product_id":"rme-pro-line-hdspe-aio-pro","title":"RME PRO LINE HDSPe AIO Pro","description":"\u003ch2\u003eDescription\u003c\/h2\u003eRME presents the HDSPe AIO Pro PCI Express audio interface, successor to the award-winning HDSPe AIORME HDSPe AIO Pro is a 1:1 replacement in terms of functionality (number of channels, I\/O). This is intentional because RME has many \"industrial\" customers who need to have this card (or an identical one) for several years. The only limitation is that the card no longer supports the AI4S-192\/AO4S-192 (while TCO\/WCM is still supported). However, the technical specifications have been significantly improved.Here are the important improvements of the new model in detail:Improved grounding circuit, for a better field experience regarding typical PC \"ground noise\" issues.Uses converters mounted on ADI-2 Pro: AK5572 and 2 x AK4490Ultra-powerful and low-noise\/distortion dedicated headphone output, with Mute relay directly derived from the ADI-2 FSHeadphone output with selectable levels between +19 dBu \/ +7 dBu (High \/ Low Power)Mute relay also for XLR\/RCA outputs - no \"pop\" when turning on the computerNew supported output reference levels. Balanced: +24 \/ +19 \/ +13 \/ +4 dBu.Unbalanced: +19 \/ +13 \/ +4 \/ -2 dBu. The interface uses a special attenuator to maximize the Signal-to-Noise Ratio and achieve lower output impedance levels even with lower reference levels.SteadyClock FS The entire analog input circuit is derived from the ADI-2 Pro, with the same reference levels of +24 \/ +19 \/ +13 \/ +4 dBu. Note: the new RME HDSPe AIO Pro does not support sample rates higher than 192 kHz or DSD. As initially stated, the basic features have not changed.","brand":"RME","offers":[{"title":"Default Title","offer_id":58001929601369,"sku":"RMEAIOPRO","price":742.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1036\/3633\/6985\/files\/rme-hdspe-aio-pro_f.png?v=1778101405"},{"product_id":"rme-pro-line-babyface-pro-fs-rmebfpfs","title":"RME PRO LINE Babyface Pro FS","description":"\u003ch2\u003eDescription\u003c\/h2\u003eThe brand new Babyface Pro once again demonstrates the extremely high level of build quality from the RME brand, a world leader in the production of professional audio devices, strictly Made in Germany. Made from a single solid aluminum block, this portable professional audio interface integrates entirely redesigned analog and digital circuits and new energy-saving technologies that guarantee optimal quality in all conditions.The first difference that is immediately evident compared to the previous version of the Babyface (now out of production) is the 'on board' availability of all the main connections, without the need for the external break-out cable which is not always practical and functional. For the main inputs and outputs, RME has designed a new XLR socket that integrates perfectly into the chassis, allowing for good space saving. The two headphone outputs, one with a mini jack connector and one parallel TRS, guarantee an optimal signal level for every situation, regardless of the headphones used.The two onboard preamplifiers with digital control provide 48V phantom power, individually selectable: these brand new circuits offer up to 70 dB of gain, adjustable in 3 dB steps, with a relay-based PAD that guarantees an exceptional level of EIN (Equivalent Input Noise), as well as overload protection and optimal gain even for microphones with low levels.The extremely careful design of the Babyface Pro allows you to work without the need for external power in practically every situation. The interface is perfectly stable with a USB 3 bus power supply, but also with most USB 2 connections, without any performance degradation. This makes the Babyface Pro the ideal solution for mobile recording, perfect on any occasion with a pair of condenser microphones.The wide range of connections also includes TOSLINK optical input and output, usable as an ADAT port with SMUX support or as SPDIF for sessions up to 192 kHz. With an external ADAT converter, the Babyface Pro is able to manage 12 analog inputs and 12 analog outputs, becoming a perfect device for multitrack recording in the studio and live. Instrument, line or high impedance signals can be connected to jack inputs 3 \u0026 4, allowing for example to record a guitar 'on the fly' without the need for other hardware. The equipment is completed by a MIDI input and output via a dedicated adapter cable.Naturally, the Babyface Pro also includes RME's TotalMix FX software, available for Windows, Mac OS X and iOS. TotalMix FX allows you to insert EQ, reverb and delay on all input and output channels up to 192 kHz. The Control Room section adds a series of advanced monitoring functions to the flexibility of routing, which greatly simplifies studio work.Main features• 24-Channel 192 kHz USB powered• 12 Inputs and 12 Outputs• 4 x Analog Inputs (Mic, Line, Instrument)• 4 x Analog Outputs (2 x XLR, 2 x Headphone)• 1 x ADAT I\/O or 1 x SPDIF I\/O optical• 1 x MIDI I\/O• 1 x USB 2.0 (USB 3 compatible)• Digital Gain Control on all inputs• Separate outputs for high and low impedance headphones• TotalMix FX (with EQ, Reverb, Delay)","brand":"RME","offers":[{"title":"Default Title","offer_id":58001929961817,"sku":"RMEBFPFS","price":749.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1036\/3633\/6985\/files\/rm_babyfacepro.jpg?v=1778101410"},{"product_id":"rme-pro-line-digiface-usb","title":"RME PRO LINE Digiface USB","description":"\u003ch2\u003eDescription\u003c\/h2\u003eThis compact, portable and lightweight audio interface transports digital audio data in SPDIF and ADAT formats to Windows and Mac computers. The Plug and Play approach allows even less experienced users to install it easily. Its features, such as robust RME drivers, allow the Digiface USB to operate quickly, conveniently and efficiently.The Digiface USB is an interface with 4 optical ADAT\/SPDIF I\/Os and equipped with a high-quality 6.3 mm TRS jack analogue headphone output. Following in the footsteps of the famous HDSP Digiface (PCI interface with headphones and triple ADAT I\/O), the Digiface USB connects more easily thanks to USB 2, which also powers the interface without the need for an external unit. In addition, the addition of another optical I\/O provides 32 input and output channels even when ADAT is used.The analog output is dedicated to channels 33\/34 and can be freely used thanks to TotalMix FX, RME's routing and monitoring solution that knows no limitations in the signal path. (The Digiface USB has no effects)Each individual optical port supports both ADAT (up to 8 channels) and SPDIF (stereo). The inputs automatically adapt to the signal format they receive, the outputs can be individually switched for ADAT and SPDIF operations. Supported formats are SMUX and SMUX4. Thus, working at 192kHz, 8 I\/Os can be used in both SPDIF and ADAT format. Its small size and USB power make the Digiface USB a useful and versatile interface. It can also be used as a simple headphone amplifier for mobile operations.","brand":"RME","offers":[{"title":"Default Title","offer_id":58001930158425,"sku":"RMEDIF","price":436.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1036\/3633\/6985\/files\/digiface-usb.jpg?v=1778101413"},{"product_id":"rme-pro-line-fireface-802-fs-rmeff8fs","title":"RME PRO LINE Fireface 802 FS","description":"\u003ch2\u003eDescription\u003c\/h2\u003eThe Fireface 802 FS is a highly integrated professional audio solution, housed in a 19\" rack unit, ideal for live and studio environments that require high performance. It is an interface designed for users who want no compromise in terms of sound quality, stability, and latency, and who desire an unparalleled set of professional features. The Fireface 802 FS features new analog and digital electronics with 60 audio channels, high-quality microphone preamplifiers, state-of-the-art converters, a complete effects section, and support for sample rates up to 192 kHz. It also boasts the Active SteadyClock FS function for jitter reduction, individually selectable reference levels for all inputs and outputs, DC-coupled outputs for all 8 analog I\/O, standalone functionality, a measurement and analysis toolkit called DigiCheck, and an identical user experience on Windows PC and Mac. The Fireface 802 FS also includes an optional Class Compliant mode (30 I\/O channels up to 192 kHz) and allows the use of TotalMix FX for iPad, an RME app that enables control of the Fireface 802 FS interface directly from the iPad, without the need for a computer. The alternative Class Compliant mode can be activated via a built-in switch on the back of the interface. Additionally, there is a USB-A port for remote control (ARC USB) for connection to TotalMix FX, in both remote and standalone\/class compliant modes.Connections:• 30 input\/output channels• 12 x Analog I\/O• 4 x Microphone\/Instrument Preamplifiers• 1 x AES\/EBU I\/O• 2 x ADAT I\/O (or 1 x ADAT I\/O plus 1 x Optical SPDIF I\/O) or 2 x Optical SPDIF I\/O• 1 x Word Clock I\/O• 1 x MIDI I\/O• 1 x USB 2.0","brand":"RME","offers":[{"title":"Default Title","offer_id":58001930551641,"sku":"RMEFF8FS","price":1678.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1036\/3633\/6985\/files\/fireface-802-fs.png?v=1778101416"},{"product_id":"rme-pro-line-fireface-ufx-iii","title":"RME PRO LINE Fireface UFX III","description":"\u003ch2\u003eDescription\u003c\/h2\u003eThe Fireface UFX III is a high-end 188-channel, 24-bit\/192 kHz USB 3 audio interface designed to be the hub of any multitrack studio, capable of handling up to 94 I\/O with extreme ease. Its unparalleled flexibility, compatibility, DURec (Direct USB Recording) implementation, and RME's renowned low-latency drivers and hardware ensure flawless operation in any mode and application.Packed with professional features, including SteadyClock FS, MADI I\/O (64 channels), a powerful DSP, USB 3.0 (ready for 94 Class Compliant I\/O channels), TotalMix FX, direct USB recording, and support for the advanced ARC USB remote controller (available separately).The Fireface UFX III is the perfect tool for professionals who need to manage any multitrack recording, mixing, and mastering.Connectivity12 x Analog I\/O4 x Mic\/Line inputs2 x XLR output2 x Headphone outputs1 x AES I\/O2 x SPDIF I\/O2 x ADAT I\/O1 x Word Clock I\/O1 x MADI I\/O2 x MIDI I\/O2 x MIDI over MADICompatible with USB 3.0 \/ USB 2.0","brand":"RME","offers":[{"title":"Default Title","offer_id":58001930846553,"sku":"RMEUF3","price":2396.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1036\/3633\/6985\/files\/fireface-ufx-iii_f.jpg?v=1778101418"},{"product_id":"rme-pro-line-arc-usb-advanced-remote-control-rmearu","title":"RME PRO LINE ARC USB Advanced Remote Control","description":"\u003ch2\u003eDescription\u003c\/h2\u003eThe Advanced Remote Control (ARC) has been designed for direct access to the most used actions and commands, making daily work with RME interfaces simpler and faster. Configuration is very simple and takes place within TotalMix FX. The ARC has a robust metal chassis with a main encoder, 2 buttons and 6 buttons with LEDs. The Remote Control is connected to the audio interface via a 5m cable and a special connector on the rear panel of the cards. On the top panel of the ARC there is a rotary encoder with button function, 2 lower buttons and 6 upper buttons with status LEDs. The rotary encoder can be used to change various parameters such as gain and volume. The left Prog button is programmable and can perform various functions. The same applies to the 6 buttons which also have an LED indicating the current status. The ARC provides factory settings for the 7 programmable buttons, but can be configured as desired from the Key Commands window of TotalMix FX. The behavior of each button (push, toggle, activate and deactivate) varies according to the selected function. Available commands\/actions (examples): - Main Volume - Global Mute - Global Solo - Mute Group 1 to 4 - Solo Group 1 to 4 - Fader Group 1 to 4 - Link Main AB - Speaker B Select - DIM (Main Out) - Mute (Main Out) - Mute FX (Main Out) - Mono (Main Out) - External Input - Reverb - Echo - Cue Phones 1 to 4 - Snapshot 1 to 8 - Mic Gains - Inst. Gains - Volume Phones You can also activate several functions simultaneously. Example: on button A, the Cue Phones 1 function is set. This means that when pressed, it is possible to listen to the headphone submix through the Main output (the monitors). Now, to change the volume of the headphone submix, assign the Volume Phones 1 function to button B. By pressing both buttons, you can listen to the headphone submix in the monitor output and change its volume (the fader of the third row) by rotating the encoder. When the Fireface UCX and UFX are used in stand-alone mode, TotalMix FX on the computer is no longer available, and therefore neither are the ARC configuration settings. In this case, a series of fixed functions is activated: - Encoder rotation: Main Out Volume - Encoder press: Dim for Main Out - Recall button: Recall function for Main Out - Prog: no function - Buttons A to F: load Setup 1 to 6 * Note: the Advanced Remote Control (ARC) is compatible with all Fireface UCX, and with Fireface UFX with serial number 23241707 (built after June 2011) or higher. All interfaces with Advanced Remote Control connection produced from now on will be compatible. Those who own a Fireface UFX with a serial number lower than 23241707 can contact MidiWare to request a hardware upgrade of their interface for full compatibility with the Advanced Remote Control. This modification is not free.","brand":"RME","offers":[{"title":"Default Title","offer_id":58001930944857,"sku":"RMEARU","price":146.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"rme-pro-line-fireface-ucx-ii-rmeucxii-2","title":"RME PRO LINE Fireface UCX II","description":"\u003ch2\u003eDescription\u003c\/h2\u003eRME presents the Fireface UCX II, a new version of one of its most successful projects ever, the Fireface UCX. With 40 I\/O channels and a wide range of possible applications, the Fireface UCX II is the most valid and reliable compact professional audio interface in half-rack format on the market. The new RME product is also being presented on the occasion of the company's twenty-fifth anniversary: 25 years of innovation for the German brand, all clearly visible in this new, extremely flexible interface for studio use and live performance. The main features of the FireFace UCX II are 20 recording channels and 20 playback channels, SteadyClock FS technology, integrated parametric EQ, the possibility of direct USB recording thanks to digital DURec (Direct USB Recording) technology, and stand-alone functionality: currently, no other half-rack audio interface offers more connectivity and functionality. The Fireface UCX II integrates two mic\/line preamplifiers in XLR combo format on the front panel, along with two digitally controlled line\/instrument inputs, a headphone jack, various control buttons, a display, and the main volume potentiometer. On the back there is a set of ten balanced line inputs and outputs, MIDI, ADAT, AES\/EBU and SPDIF inputs and outputs, a USB 2.0 connection, and a switchable Word Clock I\/O. Thanks to digital DURec (Direct USB Recording) functionality, any input or output of the Fireface UCX II can be recorded directly onto a USB storage device. DURec uses integrated DSPs that allow it to operate stand-alone without the need for a computer. Potential applications in this mode include field recording, live and rehearsal recordings, or playback of recordings for a virtual soundcheck. With SteadyClock FS, the Fireface UCX II implements RME's most up-to-date clock technology. Based on an extremely detailed clock, SteadyClock FS reduces AD and DA conversion jitter in all digital formats to new lows. The Fireface UCX II comes with the TotalMix FX DSP software mixer which offers many routing and monitoring possibilities, as well as the DIGICheck analyzer which allows you to measure and analyze digital data provided in both directions with maximum precision.","brand":"RME","offers":[{"title":"Default Title","offer_id":58001931010393,"sku":"RMEUCXII","price":1299.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1036\/3633\/6985\/files\/fireface-ucx-2_f.png?v=1778101423"},{"product_id":"rme-pro-line-fireface-ufx-ii","title":"RME PRO LINE Fireface UFX II","description":"\u003ch2\u003eDescription\u003c\/h2\u003eUSB Audio Interface up to 192 kHz, 30 In\/Out: 12 x Analog I\/O, 4 x Digitally Controlled Mic\/Inst Preamps, 1 x AES\/EBU I\/O, 2 x ADAT I\/O. - TotalMix with integrated DSP effects","brand":"RME","offers":[{"title":"Default Title","offer_id":58001931108697,"sku":"RMEUF2","price":2150.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1036\/3633\/6985\/files\/home_news_firefaceufx2_1.jpg?v=1778101425"},{"product_id":"rme-pro-line-12mic-rme12mic","title":"RME PRO LINE 12Mic","description":"\u003ch2\u003eDescription\u003c\/h2\u003eRME's First Preamplifiers for Audio NetworksThe RME 12Mic features twelve microphone and line inputs with uncompromising high-quality digital conversion, remotely controllable gain, integrated MADI and AVB connectivity, and a multitude of additional features, making this product the perfect companion for any professional recording setup.Twelve Transparent Mic Preamps for Exceptional Conversion PerformanceThe pad-free microphone input stage has a 75dB gain and accepts signals up to +18 dBu. From a conversion perspective, the signal-to-noise ratio is incredible across all channels (121.1 dBA). All front XLR connections accept both mic and line levels, while the first four connectors are also TRS compatible, with high-impedance HI-Z switches for instruments.MADI and ADAT for Maximum FlexibilityMADI I\/O, both optical and coaxial, are available for independent or redundant operations and can be used for daisy-chain connections, as well as for combining and converting signals with incredibly low latency. Three optical ADAT outputs provide up to 24 channels of single-speed audio (for example, a combination of microphone inputs, MADI signals, and AVB signals), or 12 outputs at 96 kHz, ensuring compatibility with a wide range of audio interfaces. The ADAT port can also be used to send monitor mixes to an external headphone amplifier\/DAC.Two Fully Redundant Network PortsFor the first time, RME offers an AVB product with two fully redundant network ports, based on the MILAN protocol recommendations. RME AVB technology has meticulously implemented IEEE standards for audio streaming and control, allowing RME products to be managed by any AVB controller, making manufacturer-specific protocols a thing of the past. Any signal arriving at the 12Mic can be managed on a network with fixed latency and guaranteed bandwidth – no switch configuration is required.Analog In - 12Mic preamp - 12High Impedance TS - (4)TRS line - (4)D-Sub 25 line -Analog Out\tTotal - 2Headphones\t- 2TRS Line - 1D-Sub 25 Line -MADI In (48kHz) - 128Coaxial BNC In - 64Optical LC (optional) - 64Madi OUT 48kHz) - 128Coaxial BNC Out - 64Optical LC (optional) - 64AVB in\tTotal (at 48K)\t64\t128\t64 \tRedundancy\tYes\t-\tYesAVB out\tTotal (at 48K)\t64\t128\t64 \tRedundancy\tYes\t-\tYes","brand":"RME","offers":[{"title":"Default Title","offer_id":58001931207001,"sku":"RME12MIC","price":2469.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1036\/3633\/6985\/files\/12mic_f.png?v=1778101428"},{"product_id":"rme-pro-line-hdsp-tco-time-code-option-rmetch","title":"RME PRO LINE HDSP TCO Time Code Option","description":"\u003ch2\u003eDescription\u003c\/h2\u003eThe TCO module is an optional extension for some RME cards. Installed in a free computer slot, the TCO connects to the main card with a flat cable.This small module adds a Word Clock input to HDSPe cards and offers LTC and video synchronization. Thanks to its SteadyClock(TM), the TCO not only extracts absolute positions from LTC, but also an extremely clean, low-jitter word clock from LTC and video. This ensures sample-accurate timecode synchronization to audio or video sources.A single TCO can be used with several HDSP\/HDPe cards simultaneously (multicard), if connected to supported cards (see list).Connectivity:1 x Word Clock I\/O1 x Video Sync Input (alternative to WC In)1 x LTC I\/OSupported cards:- HDSP AES-32- HDSPe AIO, RayDAT, AES, MADI, PCI Card.Not HDSPe MADI FX.Not RPM.Not MADIface.","brand":"RME","offers":[{"title":"Default Title","offer_id":58001931731289,"sku":"RMETCH","price":423.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1036\/3633\/6985\/files\/hdsp-tco-time-code-option.jpg?v=1778101436"},{"product_id":"rme-fireface-uc","title":"Rme Fireface Uc","description":"\u003ch2\u003eDescription\u003c\/h2\u003eThe compact Fireface UC has been optimized for uncompromised top performance under both Windows and Mac OS.\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003eThe new RME Hammerfall core allows for extremely low latency values even when using many channels.\u003c\/div\u003e\u003cdiv\u003eFurthermore, the Fireface UC uses two different firmwares with dedicated transfer methods that break down the limits of common USB audio devices.\u003c\/div\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003eThe Win or Mac mode can be changed at any time directly from the unit: in Mac OS the MIDI ports of the Fireface UC are Class Compliant, and therefore the operating system automatically uses the provided MIDI driver.\u003c\/div\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003eIn both operating systems, the latency values you can achieve are simply incredible.\u003c\/div\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003e* The lowest available value is 48 samples in Windows Vista, 14 in Mac OSX.\u003c\/div\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003eThis means that RME guarantees performance similar to that of a PCI Express interface with a USB 2.0.\u003c\/div\u003e\u003cbr\u003e\u003cbr\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cp\u003e18 total inputs and outputs\u003c\/p\u003e\u003cp\u003e8 analog I\/O\u003c\/p\u003e\u003cp\u003e1 ADAT I\/O or 1 optical SDPIF I\/O\u003c\/p\u003e\u003cp\u003e1 coaxial SPDIF\u003c\/p\u003e\u003cp\u003e2 MIDI I\/O\u003c\/p\u003e\u003cp\u003e1 USB 2.0\u003c\/p\u003e\u003cp\u003e2 microphone preamplifiers with digital gain control\u003c\/p\u003e\u003cp\u003eTotalMix Drivers: Windows XP (from SP2), Vista, Vista 64, 7: full multi-client ASIO operability for WDM and ASIO 2.0.\u003c\/p\u003e\u003cp\u003eStereo and multi-channel support for WDM (DirectSound).\u003c\/p\u003e\u003cp\u003eMac Intel OS X (10.5 or higher): Core Audio, Core MIDI.\u003c\/p\u003e","brand":"RME","offers":[{"title":"Default Title","offer_id":58005888401753,"sku":"055801058","price":899.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1036\/3633\/6985\/files\/055801058.jpg?v=1781167758"},{"product_id":"rme-pro-line-dps-2-rmeldps2","title":"RME PRO LINE DPS-2","description":"\u003ch2\u003eDescription\u003c\/h2\u003eUltra-low noise linear audio power supply with μFilter and Sensor TechnologyThe new DPS-2 is an exceptional linear power supply that not only boasts impressive specifications but also a host of unique and extremely useful features, such as two differently filtered outputs. The housing and front panel of the DPS-2 are based on the ADI-2 series, to accommodate RME's innovative circuit design in a half-width rack.The Linear output is a traditional DC output, but it incorporates multi-stage passive and active filtering, including a 30,000 μF capacitor bank, a ferrite inductor, and an active output filter with a hybrid voltage regulator.The second output is based on RME's patented μFilter technology. In this case, the pre-filtered Linear output signal is also processed by highly efficient active filters to achieve an exceptionally clean DC output with noise levels of only a few μV (microvolts). In addition, the output features sensor technology that measures and adapts the output voltage directly at the DC connector of the supplied DC cable. As a result, the output impedance and load regulation are extremely low and ensure a clean +12.0 V output voltage at a 2.5 A load, completely avoiding load-dependent voltage drops.The additional use of a 2-stage RF filter and a DC filter on the AC mains side allows the DPS-2 to deliver optimal performance without interference. This is further enhanced by the 60 VA \"audio grade\" toroidal transformer with additional isolation winding and magnetic tape shielding, ensuring absolutely hum-free operation in all situations, while the Ground Lift switch can be used to disconnect the DC ground from the grounding circuit, if necessary, to eliminate interference or hum. In this case, safety is not compromised, as the primary and enclosure remain firmly connected to the mains earth. Furthermore, the DPS-2 features a screw ground terminal for grounding other equipment or for using a different ground for audio power.The DPS-2 has two status LEDs on the front panel to provide a quick overview of operating modes and possible malfunctions (power, thermal and power overload, undervoltage, short circuit, active output). A recessed push-button switch on the front panel allows activation of AutoDark mode, where the LEDs light up only when turned on and in case of an error.Connectivity- Linear DC output 12V 2.5A- μFilter DC output 12V 2.5A- Screw ground terminal- IEC mains socket","brand":"RME","offers":[{"title":"Default Title","offer_id":58016961134937,"sku":"RMELDPS2","price":1102.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1036\/3633\/6985\/files\/rmedps2.1_f.jpg?v=1778264560"},{"product_id":"rme-pro-line-lni-2-dc-filter-and-stabilizer","title":"RME PRO LINE LNI-2 DC Filter and Stabilizer","description":"\u003ch2\u003eDescription\u003c\/h2\u003eLow-noise isolation DC filter, 12 Volt 2 Ampere, DC input and outputEnclosed in a compact chassis, RME's unique and innovative active DC filter can filter the output signal from any power supply, bringing it to the quality level of a high-end hi-fi battery, and at the same time isolates possible ground loops or hum thanks to two exclusive features: galvanic isolation and RME's μFilter technology.Galvanic isolation almost completely eliminates the leakage current common to switching power supplies, reducing the coupling capacitance between input and output from 1 nF (nano Farad) to less than 35 pF (pico Farad). The LNI-2 DC works with power sources ranging from 9 V to 18 V DC and always provides a fixed and perfect output value of 12.0 V.RME's μFilter consists of a discrete linear regulator with remarkably low noise, soft start, thermal and overcurrent protection, and is therefore 100% short-circuit proof. Two status LEDs on the top of the unit indicate input and output voltage and overload.As an additional feature, the DC output ground can be connected to earth or another device ground via a screw to solve grounding wiring issues.","brand":"RME","offers":[{"title":"Default Title","offer_id":58016961233241,"sku":"RMELNI2DC","price":517.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1036\/3633\/6985\/files\/rmelni-2.2_f.jpg?v=1778264564"},{"product_id":"rme-premium-line-m-1620-pro-d","title":"RME PREMIUM LINE M-1620 Pro D","description":"\u003ch2\u003eDescription\u003c\/h2\u003eM-1620 ProNew series of high-end AD\/DA converters. 36 channels compatible with ADAT, MADI, Dante or AVB-Milan.The M-1620 Pro converts 16 line I\/O from analog to digital and vice versa - sources can be MADI Coax and SFP, ADAT or AVB (Dante in the case of the M-1620 Pro D).In addition, two headphone outputs provide 4 additional channels for monitoring. All of this is housed in a single 19” rack unit with a newly designed front panel that combines individual level meters directly on the machine's display. An indispensable addition for immersive audio installations, but also a versatile extension for any audio network. A series of advanced features complete the I\/O equipment: two network ports provide redundancy or allow cascading within the same network (Dante model only). BNC and coaxial connectors for MADI or Word Clock are provided by default, while optical MADI can be added with an optional SFP module, making it ideal for applications requiring a high number of channels at high sample rates. Channels on both MADI ports can be individually routed to and from the AVB or Dante ports. Dante connectivity was a frequent request and has been integrated to work natively on the M-1620 Pro's hardware. This provides the ability to directly connect other audio devices via a standard network switch and allows users to directly record and play up to 64 channels from their computer to any analog and digital I\/O of the M-1620 using the Dante Virtual Sound Card (license not included).AVB models transmit and receive up to 128 channels at 48 kHz (96@96k, 64@192k) with precise and fixed latency across the entire network. Each device reveals its status and configurable options to the network's ATDECC controllers, allowing it to be integrated into systems using the open IEEE 1722.1 standard.All device states are controlled directly from the front panel via the 2.54\" TFT screen, for convenient and direct access to all functions. The integrated routing matrix allows quick routing of all analog inputs directly to the headphone output, as well as all digital signals and network streams. This makes troubleshooting signals, clock, connectivity or anything else simple and immediate!With up to 36 channels, ADAT and MADI I\/O with intelligent routing of all channels, the brand new M-1620 Pro series truly represents the state of the art in multichannel converters with exceptional audio performance.Connections16 x Analog In \/ 16 x Analog Out (25-pin D-sub, up to +24 dBu)Dual stereo headphone output2 x MADI I\/O (Coaxial BNC included and optional SFP optical module)4x ADAT I\/O2 x RJ45 1 GigEWord Clock I\/O (BNC)MIDI I\/OUSB 2.0 (for remote control)","brand":"RME","offers":[{"title":"Default Title","offer_id":58018800304473,"sku":"RMEM1620PD","price":3412.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1036\/3633\/6985\/files\/m-1620-pro-d.png?v=1778271858"},{"product_id":"rme-premium-line-hdspe-aox-d","title":"RME PREMIUM LINE HDSPe AoX-D","description":"\u003ch2\u003eDescription\u003c\/h2\u003eHDPSe AoXPCI Express audio interface with 512 channels, 4x MADI, Dante or AVB-Milan compatible. The HDSPe AoX (AVB) and HDSPe AoX-D (Dante) audio interfaces are RME's 2 new solutions for audio over IP in PCIe x4 format, equipped with 2 network ports, a headphone output, and AES3 and MIDI ports, in addition to SteadyClock™ technology for all digital inputs and the possibility of being expanded with up to four optional MADI ports.Whether used in a Thunderbolt expansion chassis or installed in a workstation or within dedicated audio processors, these cards send and receive up to 512 audio channels and offer extensive mixing and routing capabilities via TotalMix.ConnectionsPCIe I\/O: 512\/256\/128 channels with 48\/96\/192 kHz sample rates1x stereo headphone output, 1⁄4“ TRS4 x MADI I\/O (coaxial BNC included and optional SFP optical modules)AES3 I\/O on DB9-XLR breakout cable2 x RJ45 1 GigEWord Clock I\/O (BNC)MIDI I\/O on DB9 - 2x DIN breakout cable","brand":"RME","offers":[{"title":"Default Title","offer_id":58018800501081,"sku":"RMEAOXD","price":1801.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1036\/3633\/6985\/files\/hdspe-aox-m.3.png?v=1778271872"},{"product_id":"rme-premium-line-hdspe-aox-m","title":"RME PREMIUM LINE HDSPe AoX-M","description":"\u003ch2\u003eDescription\u003c\/h2\u003eHDPSe AoXPCI Express audio interface with 512 channels, 4x MADI, Dante or AVB-Milan compatible. The HDSPe AoX (AVB) and HDSPe AoX-D (Dante) audio interfaces are RME's 2 new solutions for audio over IP in PCIe x4 format, equipped with 2 network ports, a headphone output, and AES3 and MIDI ports, in addition to SteadyClock™ technology for all digital inputs and the possibility of being expanded with up to four optional MADI ports.Whether used in a Thunderbolt expansion chassis or installed in a workstation or within dedicated audio processors, these cards send and receive up to 512 audio channels and offer extensive mixing and routing capabilities via TotalMix.ConnectionsPCIe I\/O: 512\/256\/128 channels with 48\/96\/192 kHz sample rates1x stereo headphone output, 1⁄4“ TRS4 x MADI I\/O (coaxial BNC included and optional SFP optical modules)AES3 I\/O on DB9-XLR breakout cable2 x RJ45 1 GigEWord Clock I\/O (BNC)MIDI I\/O on DB9 - 2x DIN breakout cable","brand":"RME","offers":[{"title":"Default Title","offer_id":58018800566617,"sku":"RMEAOXM","price":1382.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1036\/3633\/6985\/files\/hdspe-aox-m.png?v=1778271877"},{"product_id":"rme-fireface-ufx","title":"Rme Fireface Ufx +","description":"\u003ch2\u003eDescription\u003c\/h2\u003eThunderbolt\/USB 3.0 Audio Interface up to 192 kHz, 94 In\/Out: 12 x Analog I\/O, 4 x Mic\/Inst Preamps, 1 x AES\/EBU I\/O, 2 x ADAT I\/O. - TotalMix with integrated DSP effects","brand":"RME","offers":[{"title":"Default Title","offer_id":58033554325849,"sku":"RMEFUP","price":2699.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1036\/3633\/6985\/files\/fireface-ufx-images-photo-imported.jpg?v=1778487469"},{"product_id":"rme-power-supply-nt-rme-2-per-fireface-uc-e-compatibili","title":"Rme Power Supply Nt-Rme 2 For Fireface Uc And Compatibles","description":"\u003ch2\u003eDescription\u003c\/h2\u003eRME NT-RME 2 power supply for Fireface UC and compatibles","brand":"RME","offers":[{"title":"Default Title","offer_id":58033554358617,"sku":"RMEPSI","price":57.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1036\/3633\/6985\/files\/RMEPSI.jpg?v=1778487473"},{"product_id":"rme-premium-line-madiface-xt-ii-rmemaxii","title":"RME PREMIUM LINE MADIface XT II","description":"\u003ch2\u003eDescription\u003c\/h2\u003eRME Madiface XT IIRME's MADIface XT II is a 394-channel, 192 kHz USB 3.0 audio interface with comprehensive connectivity and control options for studio and live work. Compared to the MADIface XT, the MADIface XT II offers updated digital and analog circuitry and improved performance in both analog and digital domains. The MADIface XT was the world's first USB 3.0 audio interface and was distinguished by its high channel count, comprehensive connectivity, and compact design. With two mic\/line preamplifiers (XLR\/TRS combo inputs), two balanced XLR line outputs, a stereo headphone output, various digital signal options (coaxial and optical MADI, MIDI\/AES, word clock), and an additional PCI Express connection, the MADIface XT offered comprehensive connectivity.New Analog RecordingsThe MADIface XT II maintains this winning formula and improves on the signal values of the previous model. The new model offers a higher signal-to-noise ratio and lower THD in AD conversion. The maximum balanced XLR output level has increased from +15 dBu to +24 dBu. The stereo headphone output offers a level of +19 dBu and, with an impedance of 1 Ohm, greater power. All outputs also feature different switchable levels.New Digital CircuitryThe new digital board replaces the analog mini-DIN jack for remote control with an ARC USB port, which allows full control of the MADIface XT II with the optional ARC USB. The MADIface XT II also includes Room EQ, with nine parametric bands for surround configurations up to 20 mono channels.Femtosecond ClockWith the latest SteadyClock FS, the MADIface XT II offers RME's latest sync and jitter reduction technology. Based on a femtosecond clock, SteadyClock FS reduces intrinsic jitter to a minimum and filters clock jitter from 1 Hz upwards.New HardwareThe new MADIface XT II focuses on USB 3.0, as PCIExpress is no longer externally usable. Class Compliant mode has been improved, allowing simultaneous transmission of all 394 channels without drivers. Various formats and settings are available to optimize the use of Class Compliant mode.","brand":"RME","offers":[{"title":"Default Title","offer_id":58036776665433,"sku":"RMEMAXII","price":1976.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1036\/3633\/6985\/files\/madiface-xt-ii.png?v=1778514563"},{"product_id":"rme-pro-line-arc-usb-advanced-remote-control-black-edition-rmearub","title":"RME PRO LINE ARC USB Advanced Remote Control Black Edition","description":"\u003ch2\u003eDescription\u003c\/h2\u003eThe Advanced Remote Control (ARC) has been designed for direct access to the most used actions and commands, making daily work with RME interfaces simpler and faster. Configuration is very easy and takes place within TotalMix FX. The ARC features a robust metal chassis with a main encoder, 2 buttons, and 6 buttons with LEDs. The Remote Control connects to the audio interface via a 5m cable and a special connector on the rear panel of the cards. On the top panel of the ARC, there is a rotary encoder with a push-button function, 2 lower buttons, and 6 upper buttons with status LEDs. The rotary encoder can be used to modify various parameters such as gain and volume. The left Prog button is programmable and can perform various functions. The same applies to the 6 buttons which also have an LED indicating their current status. The ARC provides factory settings for the 7 programmable buttons, but it can be configured as desired from the Key Commands window of TotalMix FX. The behavior of each button (push, toggle, activate, and deactivate) varies based on the selected function. Available commands\/actions (examples): - Main Volume - Global Mute - Global Solo - Mute Group 1 to 4 - Solo Group 1 to 4 - Fader Group 1 to 4 - Link Main AB - Speaker B Select - DIM (Main Out) - Mute (Main Out) - Mute FX (Main Out) - Mono (Main Out) - External Input - Reverb - Echo - Cue Phones 1 to 4 - Snapshot 1 to 8 - Mic Gains - Inst. Gains - Volume Phones You can also activate several functions simultaneously. Example: on button A, the Cue Phones 1 function is set. This means that when pressed, it is possible to listen to the headphone submix through the Main output (monitors). Now, to modify the volume of the headphone submix, assign the Volume Phones 1 function to button B. By pressing both buttons, you can listen to the headphone submix in the monitor output and modify its volume (the fader in the third row) by rotating the encoder. When Fireface UCX and UFX are used in stand-alone mode, TotalMix FX on the computer is no longer available, and therefore the ARC configuration settings are not either. In this case, a series of fixed functions is activated: - Encoder rotation: Main Out Volume - Encoder press: Dim for Main Out - Recall button: Recall function for Main Out - Prog: no function - Buttons A to F: load Setup 1 to 6 * Note: The Advanced Remote Control (ARC) is compatible with all Fireface UCX, and with Fireface UFX with serial number 23241707 (built after June 2011) or higher. All interfaces with Advanced Remote Control connection produced from now on will be compatible. Those who own a Fireface UFX with a serial number lower than 23241707 can contact MidiWare to request a hardware upgrade of their interface for full compatibility with the Advanced Remote Control. This modification is not free.","brand":"RME","offers":[{"title":"Default Title","offer_id":58037025898841,"sku":"RMEARUB","price":164.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1036\/3633\/6985\/files\/arc-usb-advanced-remote-control-black-edition.png?v=1778516158"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1036\/3633\/6985\/collections\/58dafbb722e8f00b6c921c4361ab7fe6d5fc0a51_s.png?v=1779268129","url":"https:\/\/yourmusiconline.it\/en\/collections\/rme.oembed","provider":"yourmusiconline.it","version":"1.0","type":"link"}